Bluetti PV100 FX Flexible Solar Panel (2 pack)

The BLUETTI PV100 FX consists of two flexible 100 W solar panels designed for the roofs of motorhomes, boats and compact off-grid installations. Together they provide 200 W of solar capacity, adding a noticeable amount of extra solar energy while remaining unobtrusive thanks to their low profile and a weight of approximately 2.2 kg per panel. With dimensions of around 1,000 × 590 mm per panel, they often fit easily between roof vents, mounting rails and other rooftop components.

Light, flexible and robust
The PV100 FX uses monocrystalline PERC cells with a high efficiency of up to roughly 23.4%. Thanks to the flexible HPC lamination, the panel follows slightly curved surfaces without compromising protection. The layers around the cells are designed for everyday outdoor use and are resistant to moisture, dirt and movement while driving or sailing. The junction box and cable entry are rated IP67, so the panel can remain on the roof year after year.

Power and connection
The BLUETTI PV100 FX is a 100 W panel with a relatively high operating voltage of around 35 V. This makes it a good match for MPPT charge controllers and the PV inputs of the RV5 Power Hub, even when the cable run between roof and technical compartment is a bit longer. If you need more power, you can combine several panels in series and/or parallel, as long as you stay within the voltage and current limits of the charge controller. Standard MC4 connectors make installation straightforward.

For motorhome, boat and compact off-grid systems
Thanks to its low weight, flat profile and flexible construction, the PV100 FX is particularly practical as a roof panel on motorhomes and boats, where every centimetre of height and every kilo counts. The panel helps to recharge your house battery or battery bank and supports your 48 V system, 12/24 V DC circuits and 230 V consumers via a suitable inverter or power hub. In an RVSolar 48 V Power System, you connect the PV100 FX directly to the RV5; in other systems you pair it with a compatible MPPT charge controller.