Anker Solix Solarbank 3 E2700 Pro | 3,6 kW - 16,2 kWh

With three Anker SOLIX Solarbank 3 E2700 Pro units and three Anker SOLIX BP2700 Expansion Batteries, you create a Solarbank Parallel System with a power output of up to 3.6 kW for grid feed-in. In this setup, the batteries operate as one integrated system, combining power and capacity into a strong plug-and-play solution. When connected to a dedicated circuit in the fuse box, the system can safely feed up to 3.6 kW back into the grid through the wall socket. Using the Anker SOLIX app, you can easily manage everything and benefit from intelligent software that optimises charging and discharging based on your energy use and available capacity.

Each Solarbank 3 E2700 Pro provides a storage capacity of 2.7 kWh. In this parallel setup, that adds up to 16.2 kWh of total storage and a maximum output power of 3.6 kW. This is significantly more than most plug-in home batteries, which typically return up to 800 W. Thanks to its higher power output, the system can feed more energy back into the grid at once, increasing your self-consumption and improving the overall efficiency of your stored power.

The system operates fully automatically. When your solar panels generate more power than you currently use, the excess energy is stored for later use or fed back into the grid at favourable times for example, when electricity prices are high.

The included P1 Meter reads real-time data from your smart meter via the P1 port. This enables the system to precisely determine when you are consuming or feeding power back and to automatically adjust charging and discharging and with dynamic tariffs, always at the most cost-effective times of the day.

Thanks to its modular design, the system easily grows with your energy needs. You can later expand it with additional Solarbanks or Anker SOLIX BP2700 Expansion Batteries, allowing you to store and use even more of your own power.