The Goal Zero 20A Charger Controller is a controller that can be connected between a Goal Zero solar panel with an HPP output and a 12V battery. The alternating voltage of the solar panel is converted into a constant voltage to charge the battery. The new charge controller from Goal Zero has a built-in LCD display, where you have a visual control over the charging process, the voltage, but also the temperature. In this way the system is easy to monitor.
Important: Additional accessories are required to use this charge controller. See the matching accessories.
Specifications:
- - Equipped with an IP65 rating that provides complete protection against dust and dirt, and is resistant to water and snow.
- - Easy-to-read LCD screen that allows you to track your charging condition, select battery type and more.
- - Supports the following battery types: LifePo4, LTO, Gel, AGM, Conventional Lead Acid and Calcium batteries.
Charging Characteristics:
- Start Voltage at 25°C: 3-10V
- Charge Voltage at 25°C:
- LTO battery: 14.0V
- Gel battery: 14.1V
- LiFePO4 battery: 14.4V
- Charge Voltage at 25°C: AGM battery-14.4V
- WET battery: 14.7V
- Calcium battery: 14.9V
- Equalizing Voltage at 25°C: WET or Calcium battery-15.5V
- Float Voltage at 25°C:
- Gel, AGM, WET, Calcium batteries-13.6V
- LTO and LiFePO4 batteries-13.4V
- Battery temperature compensation coefficient: -24mV/°C
- Spade to HPP Cable Length: 91,44 cm