Second Chance - Goal Zero 20A Charger Controller

The Goal Zero 20A Charger Controller is a controller that can be connected between a Goal Zero solar panel with an HPP output and a 12V battery. The alternating voltage of the solar panel is converted into a constant voltage to charge the battery. The new charge controller from Goal Zero has a built-in LCD display, where you have a visual control over the charging process, the voltage, but also the temperature. In this way the system is easy to monitor.

Important: Additional accessories are required to use this charge controller. See the matching accessories.

Specifications:

• - Equipped with an IP65 rating that provides complete protection against dust and dirt, and is resistant to water and snow.
• - Easy-to-read LCD screen that allows you to track your charging condition, select battery type and more.
• - Supports the following battery types: LifePo4, LTO, Gel, AGM, Conventional Lead Acid and Calcium batteries.

Charging Characteristics:

• Start Voltage at 25°C: 3-10V
• Charge Voltage at 25°C:
• LTO battery: 14.0V
• Gel battery: 14.1V
• LiFePO4 battery: 14.4V
• Charge Voltage at 25°C: AGM battery-14.4V
• WET battery: 14.7V
• Calcium battery: 14.9V
• Equalizing Voltage at 25°C: WET or Calcium battery-15.5V
• Float Voltage at 25°C:
• Gel, AGM, WET, Calcium batteries-13.6V
• LTO and LiFePO4 batteries-13.4V
• Battery temperature compensation coefficient: -24mV/°C
• Spade to HPP Cable Length: 91,44 cm